THERMAL MANAGEMENT – Component Values https://componentsvalue.com Best Electronic Component Providers Thu, 06 Apr 2023 05:56:46 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.4 https://componentsvalue.com/wp-content/uploads/2023/03/cropped-Final-Logo--32x32.png THERMAL MANAGEMENT – Component Values https://componentsvalue.com 32 32 Submersible Water Pump – DC 12V 4.2W 240L/H Flow Rate – Waterproof Brushless Pump Mini Ultra-Quiet – for CPU GPU LED Water Cooling Block and Aquarium https://componentsvalue.com/product/submersible-water-pump-dc-12v-4-2w-240l-h-flow-rate-waterproof-brushless-pump-mini-ultra-quiet-for-cpu-gpu-led-water-cooling-block-and-aquarium/ https://componentsvalue.com/product/submersible-water-pump-dc-12v-4-2w-240l-h-flow-rate-waterproof-brushless-pump-mini-ultra-quiet-for-cpu-gpu-led-water-cooling-block-and-aquarium/#respond Thu, 06 Apr 2023 05:54:50 +0000 https://componentsvalue.com/?post_type=product&p=4060
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. Air fittings feature tighter seals and have lower pressure requirements than hydraulic fittings and are typically offered in various connector types.
  • Buy 100 for ₹498.00 each and save 44%
  • Buy 1000 for ₹444.00 each and save 50%
]]> Product description:

The pump needs to be submerged (inside) the water for the pump to work. Do not connect the tube on the inlet. The tube should be connected only to the outlet.

Features:

  • Brushless, permanent magnetic rotor.
  • Super long working life(more than 30000 hours), super durable.
  • Low consumption and low noise.
  • Adopt a high-performance ceramic shaft.
  • Amphibious design, submersible installation and entirely waterproof.
  • The axes are enclosed with static sealing, not dynamic, which can avoid leaking problems.

Specification:

  • Suitable for cooling graphics GPU, motherboard Northbridge Southbridge CPU, graphics; semiconductor cooling piece, industrial cooling, etc
  • Rated Voltage: DC12V; Rated Current: 375MA; Power Consumption: 4.2W; Use 12V less than 1A power supply
  • Inlet diameter: 8mm; Outlet diameter: 8mm
  • Flow Rate: 240L/H; Material: plastic; Water Proof: IP68; Heat Resistance: 0-100°; Working Life Span: 20000 hours; Noise: ≤40DB;
  • Cable Length: 45CM (can be extended):

Package includes:

  • 1 x Mini Water Pump
  • 1 x U-shaped Accessory
]]> https://componentsvalue.com/product/submersible-water-pump-dc-12v-4-2w-240l-h-flow-rate-waterproof-brushless-pump-mini-ultra-quiet-for-cpu-gpu-led-water-cooling-block-and-aquarium/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 10mm PZA https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pza/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pza/#respond Thu, 06 Apr 2023 05:52:08 +0000 https://componentsvalue.com/?post_type=product&p=4058
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. Air fittings feature tighter seals and have lower pressure requirements than hydraulic fittings and are typically offered in various connector types.
  • Buy 100 for ₹64.00 each and save 32%
  • Buy 1000 for ₹57.00 each and save 39%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC083-PLASTIC-10mm-PZA

Advantages:

  • Not easy to trip
  • Pressure and  Explosion-proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pza/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 10mm PK https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pk/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pk/#respond Thu, 06 Apr 2023 05:48:46 +0000 https://componentsvalue.com/?post_type=product&p=4056
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. Air fittings feature tighter seals and have lower pressure requirements than hydraulic fittings and are typically offered in various connector types.
  • Buy 100 for ₹64.00 each and save 32%
  • Buy 1000 for ₹57.00 each and save 39%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC084-PLASTIC-10mm-PK

Advantages:

  • Not easy to trip
  • Pressure and  Explosion  proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pk/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 10mm HVFF https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-hvff/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-hvff/#respond Thu, 06 Apr 2023 05:44:42 +0000 https://componentsvalue.com/?post_type=product&p=4054
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. Air fittings feature tighter seals and have lower pressure requirements than hydraulic fittings and are typically offered in various connector types.
  • Buy 100 for ₹272.00 each and save 30%
  • Buy 1000 for ₹243.00 each and save 38%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC085-PLASTIC-10mm-HVFF

Advantages:

  • Not easy to trip
  • Pressure and  Explosion  proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-hvff/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 10mm PA https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pa/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pa/#respond Thu, 06 Apr 2023 05:40:16 +0000 https://componentsvalue.com/?post_type=product&p=4052
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. Air fittings feature tighter seals and have lower pressure requirements than hydraulic fittings and are typically offered in various connector types.
  • Buy 100 for ₹149.00 each and save 30%
  • Buy 1000 for ₹133.00 each and save 38%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC086-PLASTIC-10mm-PA

Advantages:

  • Not easy to trip
  • Pressure and  Explosion-proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-10mm-pa/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 8mm HVFF https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-hvff/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-hvff/#respond Mon, 03 Apr 2023 12:56:34 +0000 https://componentsvalue.com/?post_type=product&p=3963
Pneumatic fittings are parts used to connect sections of pipe, tube, and hose in pneumatic (pressurized gas) systems. Compared to hydraulic fittings, pneumatic fittings are typically characterized by tighter seals and lower pressure requirements. They are frequently used in pneumatic logic control systems and instrumentation
  • Buy 100 for ₹212.00 each and save 30%
  • Buy 1000 for ₹190.00 each and save 38%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC076-PLASTIC-8mm-HVFF

Advantages:

  • Not easy to trip
  • Pressure and  Explosion-proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-hvff/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 8mm PK https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-pk/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-pk/#respond Mon, 03 Apr 2023 12:56:34 +0000 https://componentsvalue.com/?post_type=product&p=3964
Pneumatic fittings are parts used to connect sections of pipe, tube, and hose in pneumatic (pressurized gas) systems. Compared to hydraulic fittings, pneumatic fittings are typically characterized by tighter seals and lower pressure requirements. They are frequently used in pneumatic logic control systems and instrumentation
  • Buy 100 for ₹52.00 each and save 33%
  • Buy 1000 for ₹47.00 each and save 39%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC075-PLASTIC-8mm-PK

Advantages:

  • Not easy to trip
  • Pressure and  Explosion  proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-pk/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 8mm PA https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-pa/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-pa/#respond Mon, 03 Apr 2023 12:53:53 +0000 https://componentsvalue.com/?post_type=product&p=3961
Pneumatic fittings are parts used to connect sections of pipe, tube, and hose in pneumatic (pressurized gas) systems. Compared to hydraulic fittings, pneumatic fittings are typically characterized by tighter seals and lower pressure requirements. They are frequently used in pneumatic logic control systems and instrumentation
  • Buy 100 for ₹100.00 each and save 32%
  • Buy 1000 for ₹90.00 each and save 38%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC077-PLASTIC-8mm-PA

Advantages:

  • Not easy to trip
  • Pressure and  Explosion  proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-8mm-pa/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 6mm PY https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-6mm-py/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-6mm-py/#respond Mon, 03 Apr 2023 12:44:08 +0000 https://componentsvalue.com/?post_type=product&p=3955
Pneumatic fittings are parts used to connect sections of pipe, tube, and hose in pneumatic (pressurized gas) systems. Compared to hydraulic fittings, pneumatic fittings are typically characterized by tighter seals and lower pressure requirements. They are frequently used in pneumatic logic control systems and instrumentation
  • Buy 100 for ₹39.00 each and save 33%
  • Buy 1000 for ₹35.00 each and save 40%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC060-PLASTIC-6mm-PU

Advantages:

  • Not easy to trip
  • Pressure and  Explosion  proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-6mm-py/feed/ 0 Pneumatic Push in Fitting – for Air / Water Hose and Tube Connector – 6mm PV https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-6mm-pv/ https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-6mm-pv/#respond Mon, 03 Apr 2023 12:44:07 +0000 https://componentsvalue.com/?post_type=product&p=3954
Pneumatic fittings provide the essential link between tubes, hoses and other components in a pneumatic system. Air fittings feature tighter seals and have lower pressure requirements than hydraulic fittings and are typically offered in various connector types.
  • Buy 100 for ₹40.00 each and save 34%
  • Buy 1000 for ₹36.00 each and save 40%
]]> Specification:
  • Pneumatic Push In Fittings for Air/Water Hose and Tube Connector
  • Body: Acetal & Brass Nickel Plated Finish Resin
  • Lock Claws: Stainless Steel
  • Thread: Coated Threads
  • Fittings with external threads have a sealing layer, so you don’t need to use any adhesives.
  • Retain tightness automatically after inserting the hose.
  • Seal: NBR
  • Operating Pressure: 0-1 Mpa
  • Negative Pressure:  -750mmhg (10 Torr)
  • Operating Temperature: 0 to 60°C
  • Fluid: Air – Water – Vacuum
  • Package Included: 1x Connector
  • Fit For Tube Material: PU/PE/Nylon, Polyurethane
  • Model Number: HC060-PLASTIC-6mm-PU

Advantages:

  • Not easy to trip
  • Pressure and  Explosion  proof
  • Preferred material
  • Not easy to leak
]]> https://componentsvalue.com/product/pneumatic-push-in-fitting-for-air-water-hose-and-tube-connector-6mm-pv/feed/ 0