Stepper Driver Module – Component Values https://componentsvalue.com Best Electronic Component Providers Thu, 06 Apr 2023 07:51:04 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.4 https://componentsvalue.com/wp-content/uploads/2023/03/cropped-Final-Logo--32x32.png Stepper Driver Module – Component Values https://componentsvalue.com 32 32 Stepper Motor 28YBJ-48 DC 5V 4 Phase 5 Wire – with ULN2003 Driver Board https://componentsvalue.com/product/stepper-motor-28ybj-48-dc-5v-4-phase-5-wire-with-uln2003-driver-board/ https://componentsvalue.com/product/stepper-motor-28ybj-48-dc-5v-4-phase-5-wire-with-uln2003-driver-board/#respond Thu, 06 Apr 2023 07:40:39 +0000 https://componentsvalue.com/?post_type=product&p=4114
  • Buy 100 for ₹353.00 each and save 40%
  • Buy 1000 for ₹315.00 each and save 46%
]]>
Product description:
  •  5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board, supporting the use of a direct plug and easy to use stepper motor used in the development board.
  • Stepper motor driver board with ULN2003 A, B, C, D four-phase LED indicates the status of the stepper motor work Stepper motor with a standard interface when used directly pluggable.

Specification:

  • Stepper Motor:- Model: 28BYJ-48 5V 4-Phase 5-Wire , Rated voltage: 5VDC, Number of Phase: 4, Speed Variation Ratio: 1/64
  • Driver Board: Model: ULN2003, Stride Angle: 5.625° /64, Frequency : 100Hz, DC resistance : 50Ω±7%(25℃)
  • Idle In-traction Frequency : > 600Hz, Idle Out-traction Frequency : > 1000Hz, In-traction Torque >34.3mN.m(120Hz), Self-positioning Torque >34.3mN.m, Friction torque : 600-1200 gf.cm, Pull in torque: 300 gf.cm
  • Insulated resistance >10MΩ(500V), Insulated electricity power :600VAC/1mA/1s, Insulation grade :A
  • Rise in Temperature <40K(120Hz), Noise <35dB(120Hz,No load,10cm), Weight: 45-50g/set, Size: Diameter: 28mm/1.10”, Power Supply(V): 5V
]]>
https://componentsvalue.com/product/stepper-motor-28ybj-48-dc-5v-4-phase-5-wire-with-uln2003-driver-board/feed/ 0
Stepper Motor Driver Module ULN2003 for 5V 4-phase 5 line 28BYJ-48 – Arduino Compatible https://componentsvalue.com/product/stepper-motor-driver-module-uln2003-for-5v-4-phase-5-line-28byj-48-arduino-compatible/ https://componentsvalue.com/product/stepper-motor-driver-module-uln2003-for-5v-4-phase-5-line-28byj-48-arduino-compatible/#respond Thu, 06 Apr 2023 06:31:46 +0000 https://componentsvalue.com/?post_type=product&p=4075
Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct .
  • Buy 100 for ₹53.00 each and save 38%
  • Buy 1000 for ₹48.00 each and save 44%
]]>
Product description:
  • A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A.
  • A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes.
  • A4988 converter is the key to easy implementation. As long as the “step” input inputting one pulse drives the motor one microstep.
  • There are no phase sequence tables, high-frequency control lines, or complex interfaces to program.
  • A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
  • In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime.
  • Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption.
  • Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO), and crossover-current protection. Special power sequencing.
  • A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation.
  • This package is Pb (suffix-T), with 100% matte tin lead frame plating.

Specifcation:

  • Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct .
  • 4-phase Reduction Ratio: 1/64, Step Torque Angle: 5.625°/64
  • DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load
  • Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct .
  • Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct
]]>
https://componentsvalue.com/product/stepper-motor-driver-module-uln2003-for-5v-4-phase-5-line-28byj-48-arduino-compatible/feed/ 0