MOTORS AND DRIVERS – Component Values

Stepper Motor 28YBJ-48 DC 5V 4 Phase 5 Wire – with ULN2003 Driver Board

componentsvalue — Thu, 06 Apr 2023 07:40:39 +0000

Product description:

5 Line 4 phase can be driven by ordinary uln2003 chip can also be connected in phase 2 development board, supporting the use of a direct plug and easy to use stepper motor used in the development board.
Stepper motor driver board with ULN2003 A, B, C, D four-phase LED indicates the status of the stepper motor work Stepper motor with a standard interface when used directly pluggable.

Specification:

Stepper Motor:- Model： 28BYJ-48 5V 4-Phase 5-Wire , Rated voltage： 5VDC, Number of Phase： 4, Speed Variation Ratio： 1/64
Driver Board: Model: ULN2003, Stride Angle： 5.625° /64, Frequency : 100Hz, DC resistance ： 50Ω±7%(25℃)
Idle In-traction Frequency : > 600Hz, Idle Out-traction Frequency : > 1000Hz, In-traction Torque >34.3mN.m(120Hz), Self-positioning Torque >34.3mN.m, Friction torque : 600-1200 gf.cm, Pull in torque: 300 gf.cm
Insulated resistance >10MΩ(500V), Insulated electricity power ：600VAC/1mA/1s, Insulation grade ：A
Rise in Temperature <40K(120Hz), Noise <35dB(120Hz,No load,10cm), Weight: 45-50g/set, Size: Diameter: 28mm/1.10”, Power Supply(V): 5V

7RPM 15 + 5.3mm 6V Slow Speed Micro Turbo Gear Motor – Micro 300 Gearbox Speed Reduction Motor – Stepped Shaft – DC 3V-9V 7 rpm

componentsvalue — Thu, 06 Apr 2023 07:30:17 +0000

Buy 100 for ₹213.00 each and save 42%
Buy 1000 for ₹190.00 each and save 48%

AC 220V 2000W SCR Voltage Regulator Dimmer Motor Speed Controller Module

componentsvalue — Thu, 06 Apr 2023 07:15:12 +0000

Product description:

How to use:

The input is connected with the AC 220V, an output connected to the electric cooker or appliance motor, turn the knob for speed, voltage, temperature control.

Applications:

Electric furnace, water heater, lamps, small motor, electric iron, etc.

Attention:

Charge/load should not exceed the maximum power of 2000W, otherwise, it will burn the module and electrical appliances;
Use the resistive load as much as possible;
Reduce the capacitive and inductive load of much energy. (It is best to leave more than half of them)

Note: Due to the difference between different monitors, the image may not reflect the actual color of the item.

Specification:

Operating voltage: AC 220 V
Maximum power: 2000W (resistive load connected)
Voltage Regulation: AC 0-220 V, Starts From AC 10 V
Protection: Anti-Peak, Surge, RC Absorption (EOC)

AC 220V 4000W SCR Voltage Regulator Dimmer Motor Speed Controller Module

componentsvalue — Thu, 06 Apr 2023 06:41:14 +0000

Product description:

How to use:

The input is connected with the AC 220V, an output connected to the electric cooker or appliance motor, turn the knob for speed, voltage, temperature control.

Applications:

Electric furnace, water heater, lamps, small motor, electric iron, etc.

Attention:

Charge/load should not exceed the maximum power of 4000W, otherwise, it will burn the module and electrical appliances;

Use the resistive load as much as possible;

Reduce the capacitive and inductive load of much energy. (It is best to leave more than half of them)

Note: Due to the difference between different monitors, the image may not reflect the actual color of the item.

Specification:

Operating voltage: AC 220 V; Thyristor type: BTA41600B
Maximum power: 4000 W (resistive load connected)
Voltage Regulation: AC 0-220 V, Starts From AC 10 V
Protection: Anti-Peak, Surge, RC Absorption (EOC)
Size: long 85* width 55* high 38mm, knob bore 6mm.

Stepper Motor Driver Module ULN2003 for 5V 4-phase 5 line 28BYJ-48 – Arduino Compatible

componentsvalue — Thu, 06 Apr 2023 06:31:46 +0000

Product description:

A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A.
A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes.
A4988 converter is the key to easy implementation. As long as the “step” input inputting one pulse drives the motor one microstep.
There are no phase sequence tables, high-frequency control lines, or complex interfaces to program.
A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime.
Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption.
Internal circuit protection includes thermal shutdown with hysteresis, under-voltage lockout (UVLO), and crossover-current protection. Special power sequencing.
A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation.
This package is Pb (suffix-T), with 100% matte tin lead frame plating.

Specifcation:

Rated Voltage: DC5V-12V 4-phase Reduction Ratio: 1/64 Step Torque Angle: 5.625°/64 DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct .
4-phase Reduction Ratio: 1/64, Step Torque Angle: 5.625°/64
DC Resistance: 200ω±7% (25°) Insulation Resistance: >10Mω (500V) Insulation Grade: A No-load
Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct .
Pull in Frequency: >600Hz No-load Pull out Frequency: >1000Hz Pull in Torque: >34.3mN.m(120Hz) Detent Torque: >34.3mN.m Temperature Rise: <40K(120Hz) Noise: <40dB (120Hz, No load, 10cm) Board Size: Approx. 40×21 mm On-board XH-5 P socket.connect 28BYJ-48 Stepper Motor direct

7RPM 43mm 6V Slow Speed Micro Turbo Gear Motor – Micro 300 Gearbox Speed Reduction Motor – M3 Thread Shaft – DC 3V-9V 7 rpm

componentsvalue — Thu, 06 Apr 2023 06:28:10 +0000

Buy 100 for ₹213.00 each and save 42%
Buy 1000 for ₹190.00 each and save 48%

MINI L293D Motor drive expansion board Motor drive module For arduino

componentsvalue — Thu, 06 Apr 2023 06:21:16 +0000

Buy 100 for ₹213.00 each and save 42%
Buy 1000 for ₹190.00 each and save 48%

SG90 9g 360 Micro Servo Motor for Tower Pro RC 250 450 Helicopter Airplane Car

componentsvalue — Thu, 06 Apr 2023 06:18:02 +0000

Product description:

Tiny and lightweight with high output power. The servo can rotate approximately 360 degrees (180 in each direction) and works just like the standard kinds but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. It comes with 3 horns (arms) and hardware.

Operating voltage: 3.0V~7.2V
Steeting Gear: 360 Degree
Operating speed: 0.12second/ 60degree ( 4.8V no load)
Stall Torque (4.8V): 17.5oz /in (1kg/cm)
Dead band width: 7usec
Dual ball bearing
Connector wire length 150mm
Net Weight: 9 grams
Coreless motor
3 pole wire
All nylon gear

SG90 9g Micro Servo Motor for Tower Pro RC 250 450 Helicopter Airplane Car – 180 DEGREE

componentsvalue — Thu, 06 Apr 2023 06:01:17 +0000

Buy 100 for ₹92.00 each and save 35%

Buy 1000 for ₹82.00 each and save 42%